Before we begin, be sure to think about what room you want your podcast studio in. Think about room acoustics, as well as ancillary noise — try not to be close to anything that will be relatively loud (such as the laundry room), and if your room is particularly “echo-y,” hang up some blankets on the walls to dampen the noise and make it more soundproof. Other than that, feel free to do what you see fit to the room, just as long as you have the essentials — a desk and a couple non-swiveling chairs that aren’t squeaky.

Microphones

This is obviously the most crucial piece of equipment that you need, and there are literally hundreds of mic options ranging from low-end models at discount retail stores all the way up to really-expensive models from Shure, AKG, and Neumann. Ideally, you’ll want to look for a large-diaphragm condenser mic, since those are the best for voice recording. They give you a deep, rich sound that will be great for your podcast.

MXL 990 Condenser Microphone – $59.99
Audio-Technica AT2020 Condenser Microphone – $99.99

Pop Filter/Screen

Since condenser mics are very sensitive to mouth noises like “P” and “Sh,” it’s important to get some kind of pop filter or screen. You don’t need to spend a lot of money on this — you can find decent ones for under $20.

Musician’s Gear 6″ Pop Filter – $14.99

Mixer

The mixer is what will allow us to fine tune the volume, bass, treble, etc. of each mic. It will also act as a device to connect your XLR microphones to your computer. You don’t need anything too outrageous here — a 4-channel mixer will do just fine for your podcasting needs. Just make sure whatever you pick has the same number of XLR connectors as the number of microphones (or more). It should also have phantom power to power your condenser mics.

Behringer XENYX 802 Mixer – $64.99
Behringer XENYX 1202FX Mixer – $108.99

Stands

You’ll obviously need microphone stands to hold up the mics. If you have enough room on your desk, you can get shorter stands that sit on your desk. This is a cheaper option, but if you don’t want to sacrifice desk space, you can get regular boom mic stands.

Musician’s Gear Low Profile Die-Cast Mic Stand – $10.99
Hercules Stands EZ Clutch Mic Stand – $49.99

Cables

You’ll need XLR cables to connect the microphones to your mixer and you’ll also need a cable to connect the mixer to your computer. This type of cable tends to be a 1/4″ cable with male connectors on both ends with a 1/4″ to 3.5mm adapter to plug into your computer’s sound input. However, some mixers can connect to computers via USB, so be sure to check the outputs of your specific mixer.

Musician’s Gear Lo-Z Microphone Cable – $4.99
Live Wire Advantage Series 1/4″ Straight Instrument Cable – $4.99

Software

The software that you use to record your podcast with is completely up to you. Budget-minded podcasters would most likely go for the free open-source audio program Audacity, but others may choose a paid program like Adobe Audition or Apple’s Logic Pro.

Accessories

The only accessory that you’ll really need is a pair of headphones so that you can monitor the audio. They also come in handy if you’re podcasting with someone over Skype — you don’t want sound coming out of your speakers to be picked up by the mic. It doesn’t really matter what headphones you use, just as long as you have something over your ears.

Conclusion

This article is meant to get you headed in the right direction and get started setting up your podcasting studio. Don’t feel that you must take my recommendations whole-heartedly. It’s just what worked for me and it may be different for someone else. Also, keep in mind that the more people you want on your podcast, the more money you’ll have to pay for microphones and such. In any case, good luck and have fun!

Image Credit: Christine Young

The post Set up your own professional podcast studio for less than $175 first appeared on Techerator.

After a few beers, a lot of people think to themselves “I have things to say! I should start a podcast!” OK, so maybe that isn’t the typical point of entry for most podcasters, but that’s exactly how it went for me as my friend Devon and I decided to start a beer-centric audio podcast a couple months ago. We wanted to start something long-lasting and of sufficient quality that we’d be able to keep the poor listeners that became ensnared in our drunken diatribes.

We decided that quality sound requires quality equipment — we were right! Fortunately, quality equipment for an audio podcast won’t knock you back more than a few hundred bucks if you’re smart about it. Here’s what you’ll need:

1. Computer

It doesn’t need to be special, but the better your soundcard, the better off you’ll be. I use an old, beat up Lenovo Thinkpad that I’ve used for years. I am assuming that you already have a desktop or notebook PC, so I’m not including this in our equipment costs. No need for something special, but if you need to replace that haggard and terrible soundcard in your e-Machine, no worries. Even a high-end audio card (SoundBlaster for instance) won’t run more than $30 or so.

2. Microphone(s)

This is probably your most important decision and deserves careful consideration. If your podcast is audio-only, you can use a high-quality USB gaming headset (~$100) though I wouldn’t recommend it. If you’re serious about your audio, invest in a real microphone, either USB or analog.

If your podcast includes multiple hosts, it’s wise to have a microphone for each person. Here’s where it gets a little tricky. Computers typically can only support a single USB microphone at a time. I say typically, but I’ve never heard evidence to the contrary. If the podcast is just you speaking, no problem, pick up a Blue Yeti USB condensor microphone (~$100 used). The Blue Yeti USB is rugged, picks up great sound, and easily plugs into any USB port.

If your podcast will have multiple hosts, your best bet is to get an analog microphone like the Rode Procaster (~$150 used). These microphones are often used by professional podcasters and have a 10-year warranty. I own two, and the sound is impressive, especially with the built-in pop filter. Definitely a good investment. Now, you may be wondering how two or more analog mics can interface with your computer — read on.

3. USB Mixer (optional)

Mixers are a good idea if you want to keep a close eye on your sound levels or if you want to use multiple microphones in your podcast. A good mixer will allow you to plug-in 2-4 (or more) microphones and adjust the gain for each, as well as accommodate an array of post effects (such as a delay) if you decide to go that route. You can do a lot with a good USB mixer, which will compile your microphone inputs to a single stream for delivery to your computer, so hold onto that manual! A good used USB mixer, such as the PV6 USB, will run about $80 used.

4. Software

You can do raw, unedited recordings of your podcast, but I reeeeally hope you consider some mild post-recording edits. Basic audio editors will let you clean up noise, add transitions to your show, and even a bit of cut/paste if necessary. There are a lot of options out there, but you probably won’t need anything more sophisticated than Audacity, a free and open-source editor that is pleasantly easy to use. Don’t worry, no PhD in audio manipulation required.

Bear in mind that most good audio equipment is durable, so don’t be afraid to head to Ebay and get something used. In fact, buy it all used if you can, because you won’t notice a difference. Just make sure the equipment is still covered by the warranty and you’ll be golden. For less than $300 you should be ready to record with the same quality as the big shot professionals.

Remember that good equipment will only take you so far — you still need to have an interesting show. But hey, solid audio is the cherry on top of a good production. Good luck, future podcaster.

The post How to Create an Audio Podcast with Professional-Quality Sound first appeared on Techerator.